1. Introduction of Product
100% Recycled PET Flake As Raw Material Single Or Twin Strap Production Line
PET Strap Band Extrusion Line is new equipment which is developed by our company through long-time production experience, combining characteristics of advanced plastics industry. It adopts frequency motor as its power, soft connection of mechanical transmission with functions of high precision, smoothness, low noised, saving power and time.
PET strap band has high stretching quality, resist high temperature. It is mainly suitable for package. Its advantages are strong pulling force, good extension, rust resistance, lighter density, convenient operation, safe, reliable and cheap price, etc.
 
2. Quick Detail:
PET Strap Production Line consists of LDAS,calender ,extrusion tool,chilled-water storage,stretcher,Tension setting machine winding machine and other machine
 
 
3. Description:
1. Raw material: PET bottle flake (or PET pellet)
2. Product: PET strap: Width: 9mm-25mm(6-16mm is also OK) Thickness: 0.5mm-1.5mm
3. Output: no less than 1.5 tons /24 hour
4. Workers: 4 -6 workers per day(work time is 24hours)
5. Installing equipment total power: 120KW, (380V; 50 Hz)
6. Workshop area: length (25-30m) * width (3-5m) * height (3-6 m)

 
4. Applications:
PET Strap Production Line is made of polyethylene glycol terephthalate and other material which is a new kind of eco-friendly packing material that take the place of Steel Strip. Through the development of new material , the cost of it goes down rapidly. Now PET Strap Production Line is used a lot in the steel industry, chemical fiber industry, aluminum industry, paper brick, ceramics, screw industry, the tobacco industry, electronics industry, textile industry and wood industry, etc. it is the new  high strength  Straps and widly used around the world which take the place of Steel Strip.      
 
5.Specifications:

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
6. Competitive Advantage:

1) Raw material is dried via the CSG series drying system which is made by our company, its minus fourty degree centigrade dew point make the moisture content of the raw material no more than 40PPM possible, what’s more, it is useful for the solid phase condensation and increase sticks to the raw material;

2) After the dry system, raw material adopts the closed cycle expulsion system, no contact with the air outside, to assure the dry effect of the raw material;

3)The extruder adopts the PET special screw, the screw’s unique separation and mixing ability enable the material even plasticizing; Dosing and steady extrusion assure even length and width of the strap.

4) The mould is self designed, different standards are made to the mold; Leakage of the material is eliminated after the improvement of the melt exchanger.

5) Static casting machine replaces the early water trough to cool the facility, casting piece is cooled under the certain constant temperature, which improves the molecular longitudinal orientation, and increases the end product longitudinal strength;

6) Calefactive anneal treatment is made after the shape of the strap, to remove the stress left after the strech, this stabilizes the molecular orientation, alleviates the phenomenon/matter of depositing metamorphism;
    7) Fetching adopts double-stage winder, easy to operate.
 
7. Service:
 
1. Oversea installation guide.
2. Oversea test running
3. Ovsersea worker training
4. Technical support
5. Spare parts supply
6. Technical operation support
7. Formula and processing support
 
8. Option
This set of equipment is mainly composed of automatic feeding machine, drying machine (or dehumidification drying device), extruder, filters, die, sink, tractor unit, oven, stretching, heat setting, winding machines and other equipment.

9. Commercial Terms
1. Payment: 30% by T/T as advance payment, balance(70%) by T/T before shipment
2. Lead Time: 60 days after receiving the advance payment
3. Transportation: container, simple package ( PE film, salver)
4.Warranty period: From the day of the use of the machine in the buyer’s factory:
   (1) The mechanical Parts: 12 months
   (2) The electrical Parts: 6 months
5. Installations and Commissioning
   (1) Up to date commissioning has been made before shipment
   (2) Overseas Commissioning and charges
   one or two technicians will be sent to the buyer to guide the installation and commissioning of the            equipment if the customer requests.
   Customers pay the charge of our technicians.
   (1) Round-trip Airplane Ticket
   (2) Charges of transportation, accommodation and communication
   (3) The allowance for the technicians is USD 80 per day for one person.
   (4) An interpreter is needed.
6. Spare parts:
    Spare parts for one year are needed for the customers, and we suggest that customers should buy       the spare parts. (Fittings list will be provided.)
7. English manual, Figuration drawing, and footing drawings are provided.